Easy Rider Speed Bumps are ideal for slowing vehicle speeds to a minimum in parking facilities. With in-molded reflective highway tape in yellow, these highly visible devices help increase both driver and pedestrian safety. Constructed from 100% recycled rubber tires, Easy Rider Speed Bumps are preformed to ensure a smooth, safe ride.
Features:
Made from 100% recycled rubber
In-molded, reflective highway tape in yellow
Cat's eye reflectors to optimize visibility at night
Pre-drilled holes for easy installation with anchoring spikes or lag bolts
Optional end caps to protect bump ends as well as vehicles
Channeled bottom to help facilitate drainage / cover cabling or piping
Can be easily removed for storage / relocation
Can be used for temporary or permanent installation
Flexible design conforms to the contour of any road surface
Can be lined together to cover the width of any roadway
Resistant to moisture, oil, temperature variations, ultraviolet light
Will not warp, crack, chip or rot
Lightweight - can be easily installed on asphalt or concrete surfaces by 1 person!
Available in 4' and 6' lengths
DIMENSIONS / WEIGHT:
4' Easy Rider Speed Bump 4' (L) x 12" (W) x 2 1/4" (H) - 32 lbs.
6' Easy Rider Speed Bump
6' (L) x 12" (W) x 2 1/4" (H) - 51 lbs.
INSTALLATION HARDWARE
Installing On:
Required Hardware:
No. of Spikes Needed:
Asphalt
Spikes or Lag Bolts & Shields
3 per speed bump
Concrete
Lag Bolts & Shields
3 per speed bump
*Installation hardware and end caps sold separately
VIEW OUR SPEED BUMPS IN ACTION!
We've created a short video presentation showing our speed bumps in action! Use the links below to view.
Disclaimer: These videos and photos are for illustration purposes only!
EASY RIDER SPEED BUMP END CAPS (Sold Separately)
Easy Rider End Caps must be used to help protect the bump from the excessive wear and tear of vehicles. Without the End Caps, drivers may be tempted to try and avoid the bump's impact by driving through the opening end section. The End Caps also help to protect vehicles by ensuring a smooth, safe ride.
DIMENSIONS / WEIGHT:
6" (L) x 12" (W) x 2 1/4" (H) - 5.5 lbs.
INSTALLATION HARDWARE
Installing On:
Required Hardware:
No. of Spikes Needed:
Asphalt
Spikes or Lag Bolts & Shields
1 per end cap
Concrete
Lag Bolts & Shields
1 per end cap
*Installation hardware sold separately
ROADTECH PARK-IT CAR STOPS
Rubber Park-It car stops are used in parking facilities to effectively stop cars pulling into parking spots, helping protect vehicles and the surrounding infrastructure. Unlike asphalt, concrete or plastic parking curbs, which need frequent replacements, Park-It rubber wheel stops are more forgiving of vehicles, sturdier and do not break or need to be replaced.
The recycled rubber parking curb come with pre-molded holes and can be shipped with anchoring spikes or lag bolts for installation. They are lightweight and can be easily installed by one person. The flexible design conforms to the contour of uneven road surfaces. Designed to withstand extreme temperature variants, the car stops are resistant to moisture, oil, and ultraviolet light. They will not warp, crack, chip, or rot.
Park-It car stops are available in 22", 3', 4', and 6' lengths. In-molded reflective tape is available in yellow, white, or (handicap) blue.
Car stops are covered by a 3 year warranty.
INSTALLATION HARDWARE
Installing On:
Required Hardware:
No. of Spikes Needed:
Asphalt
Spikes or Lag Bolts & Shields
4 per curb
Concrete
Lag Bolts & Shields
4 per curb
*Installation hardware sold separately
Available In 22", 3', 4', and 6' lengths
Features:
Made from 100% recycled rubber
In-molded, reflective highway tape available in: yellow, white, or blue (for handicapped parking spaces)
Low profile is more forgiving than concrete - rubber Park-Its will not damage low front-end vehicles
Pre-drilled with holes for easy installation
Car stop can be easily removed for storage / relocation
Flexible design conforms to the contour of uneven road surfaces
Resistant to moisture, oil, temperature variations and ultraviolet light
Lightweight - can easily be installed on asphalt or concrete surfaces by 1 person!
Long lasting and cost efficient
Ideal for indoor or outdoor parking
Will not chip, crack, or fade
High visibility at night
Can be installed on any road surface
Temporary or permanent installation
1/10th the weight of standard concrete curb
Maintenance free
3 year warranty
Installation Locations:
Surface parking lots
Multi-level parking lots
Park It car stops have been used in the following locations:
Product Description : 1. Material: compression molded composite of the 100% recycled rubber and polyurethane prepolymer
2. Physical properties of the rubber composite:
a) Density 0.6 oz/cu in (ASTM C642)
b) Durometer Hardness 65A ± 7 (ASTM D2240)
c) Tensile Strength* minimum 210 psi (ASTM D412)
(* main structural areas)
d) Compression deformation 10% at 70psi, 68°F (ASTM D575)
e) Brittleness at Low temperature: -40°F (ASTM D746)
f) Freeze and thaw when exposed to deicing chemicals (ASTM C672)
g) Coefficient of thermal expansion 8 x10-5 in/in/°F (ASTM C531)
h) Weathering 70 hours at 158°F (ASTM D573)
hardness retained
100% (± 5%)
compressive strength 100% (± 5%)
tensile strength 100% (± 5%)
elongation retained 100% (± 5%)
3. Available models: 6', 4', 3' and 22" lengths
4. Finishing: Black with in-molded reflective pavement marking tape in yellow, blue or white parallelograms
